March 19, 2004Got my headers and my adjustable preasure regulator today, the regulator will be in the truck on sunday, and the headers will be done with the rest of my exhaust in about 3 or 4 weeks. just have to finish paying off the new motor. So for you tbi guys i'll let yous know how the regulator works, i've been reading ton's on it and they say that the 350 with minor mods should be running 14+ psi and the factory setting is between 11 and 13 so at higher rpm it leans out and the computer will retard, so you don't notice everything feels good but you could be getting more out of it, and i'll tell you's how to tune through your O2 sensor if anyone is curious or is going to do the same mod.
Forums : Alberta Chapter : Got new parts today (Go to chapter) (140 Views)
March 22, 2004How many, if any, horse extra would it bring me? Same question on the headers. Runnin' a 5.3 with an intake, TB spacer, advanced cam and superchips perfomance program.
March 23, 2004the headers should give you some decent torque numbers if you get long tube's, the preasure regulator will help you maximize what your getting out of the chip. i'll let you know what kind of a difference it make's when i get it on the dyno.
March 23, 2004Cool, might just have to take you up on that Dyno run. I'm in Edmonton April 10 and 11.
March 24, 2004e-mail me before you come up and i'll give you my number, i'll see if i can get ya a deal on a couple pulls. it should be 35 for 2 or 3 pulls, there pretty good about it. plus you get a print out and a disc with the readings.